Vinyl types

Below is a list of Oracal vinyl types.
Oraguard 270 Stone Guard Film

Oraguard 270 provides medium-term outdoor paint protection for automotive fenders, rear bumpers, and deck or side skirts, and other outdoor applications. Use on flat and slightly curved surfaces. Available in transparent gloss.

ApplicationsMedium-term paint protection for automotive fenders, rear bumpers, and deck or side skirts, and other outdoor applications. Use on flat and slightly curved surfaces.
Thickness6 mil
Durability5 years
Release Liner84# Kraft paper, siliconized on one side
AdhesiveClear, solvent-based, permanent adhesive
Film
ColorsAvailable in transparent gloss finish

Full specs: ORAGUARD® 270 STONE GUARD FILM

Oraguard 280 Stone Guard Film

Oraguard 280 provides long-term paint protection for automotive fenders, rear bumpers, and deck or side skirts, and other outdoor applications. Use on flat and slightly curved surfaces. Use on flat and slightly curved surfaces. Available in transparent gloss.

ApplicationsLong-term paint protection for automotive fenders, rear bumpers, and deck or side skirts, and other outdoor applications. Use on flat and slightly curved surfaces.
Thickness8 mil
Durability7 years
Release Liner84# Kraft paper, siliconized on one side
AdhesiveClear, solvent-based, permanent adhesive
Film
ColorsAvailable in transparent gloss finish

Full specs: ORAGUARD® 280 STONE GUARD FILM

Oracal 341 Promotion Calendered Film

Oracal 341 is the most economical vinyl made by Oracal. It's a great choice for banners, yard signs, and other short-term applications. This is a permanent adhesive that lasts 3 years and comes in 21 different colors.

Suitable for use on plotter cutting systems.

ApplicationsShort-term indoor and outdoor lettering, marking, and decoration
Thickness3 mil
Durability3 years - colored/transparent

2 years - metallic

Release Liner4-mil, polyester film, silicone coated on one side, reverse treated
AdhesiveSolvent polyacrylate, permanent, transparent
FilmCalendered
Colors21 gloss colors and transparent

Full specs: ORALITE® 341 PROMOTIONAL CALENDERED FILM

Oracal 631 Exhibition Cal

Oracal 631 vinyl is a popular vinyl type that you will come across a lot. What makes it so popular is that it's great for cutting and was designed specifically for drywall. This vinyl adhesive is removable and water-based, so it can be peeled right off and not leave anything behind.

Keep in mind, it's only removable for up to 2 years when used indoors. After this time, the adhesive becomes permanent and will require an adhesive remover to clean up the remaining residue.

Oracal 631 vinyl is best for temporary indoor applications, where you want to remove the vinyl later on. The materials that you don't want to use Oracal 631 is on anything that will get wet. This vinyl has a matte finish to suppress reflection and comes in 89 vivid colors and in transparent.

Suitable for use on plotter cutting systems.

ApplicationsShort- to medium-term applications indoors; specifically on painted drywall surfaces
Thickness3 mil
Durability3 years (indoor)
Release Liner84# custom silicone coated paper with special release characteristics that provide excellent weeding and release values. Customized blue silicone paper liner for white provides superior contrast for weeding.
AdhesiveClear, water-based, removable adhesive
FilmCalendered
ColorsAvailable in 89 matte colors and transparent

Full specs: Oracle 631 EXHIBITION CALENDERED

Oracal 641 Economy Cal

Oracal 641 is similar to Oracal 651 and can come in either matte or glossy finishes. It has a water-based permanent adhesive, so unlike Oracal 631, is it not temporary.

It can be used outdoors, and last anywhere between 3-5 years. When using indoors, Oracal 641 can last indefinitely.

One difference between Oracal 641 and 631 is that Oracal 641 can get wet, so feel free to use it on items such as mugs, cups, and outdoor car windows.

One great thing about this vinyl is that it is great for weeding. It's a good choice for banners, window graphics, and general signage.

Suitable for use on plotter cutting systems.

ApplicationsIdeal for short- to medium-term indoor and outdoor lettering, marking and decoration. Not recommended for vehicle graphics.
Thickness2.75 mil
Durability4 years - black and white

3 years - colors/transparent/metallic

Release Liner84# custom silicone coated paper with special release characteristics that provide excellent weeding and release values. Customized blue silicone paper liner for gloss white provides superior contrast for weeding.
AdhesiveClear, water-based, permanent adhesive
FilmCalendered
ColorsAvailable in 60 gloss and 21 matte colors

Full specs: ORACAL® 641 ECONOMY CALENDERED FILM

Oracal 651 Intermediate Cal

Oracal 651 is the most popular type of vinyl and is great for beginners. This is a permanent adhesive vinyl that lasts 5-8 years outdoors. The life of the vinyl depends on the colors, finish and use.

It can also be used on things like mugs, cups, car decals, and signs. It is not recommended to be used in the dishwasher though, so you’ll want to handwash these items instead.

Oracal 651 is very popular for being used as car decals. You can also use it on mailboxes and boats - basically anything to weather the outdoors.

It comes in many different gloss colors and also available in matte in black, white, and transparent colors.

Suitable for use on plotter cutting systems.

ApplicationsMedium-term indoor and outdoor lettering, marking, and decoration
Thickness2.5 mil
DurabilityUp to 6 years
Release Liner84# custom silicone coated paper with special release characteristics that provide excellent weeding and release values. Customized blue silicone paper liner for matte and gloss white provides superior contrast for weeding.
AdhesiveClear, solvent-based, permanent adhesive
FilmCalendered
ColorsAvailable in 60 gloss colors plus transparent, matte white and matte black

Full specs: ORACAL® 651 INTERMEDIATE CALENDERED FILM

Oracal 751C High Performance Cast

Oracal 751 is a permanent adhesive and is considered a cast vinyl instead of a calendared vinyl. Cast vinyl is manufactured through a pouring process instead of a stretching process. This results in a vinyl that is much more thinner and flexible, making it better for curved surfaces, such as mugs or vehicles.

It's a little more expensive than calendared film, but the price is made up in quality when it's needed.

Oracal 751 is ideal for decorations that require higher durability and conformity. It's especially great on vehicle and fleet graphics.

Suitable for use on plotter cutting systems.

ApplicationsLettering, marking and decoration with high requirements for durability and conformability; high-quality vehicle and fleet graphics
Thickness2 mil
DurabilityUp to 8 years
Release Liner84# custom silicone coated paper with special release characteristics that provide excellent weeding and release values. Customized blue silicone paper liner for matte and gloss white provides superior contrast for weeding.
AdhesiveClear, solvent-based, permanent adhesive
FilmCast
ColorsAvailable in 78 gloss colors plus transparent, matte white and matte black

Full specs: ORACAL® 751C HIGH PERFORMANCE CAST FILM

Oramask 810 Stencil Film

Oramask 810 is designed for use in conformable stencil applications, especially for paint and spray techniques on complex curves, uneven or semi-flexible substrates and surfaces requiring transparency of the mask for substrate visibility. Not suitable for wet applications.

This film is not reusable.

ApplicationsDeveloped for use in conformable stencil applications, especially for paint and spray techniques on complex curves, uneven or semi-flexible substrates and surfaces requiring transparency of the mask for substrate visibility. Not suitable for wet applications.
Thickness3 mil
DurabilityNot reusable
Release Liner84# silicone coated paper
AdhesiveClear, water-based, low-tack, removable adhesive
Film
ColorsAvailable in transparent grey with a matte surface

Full specs: ORAMASK® 810 STENCIL FILM

Oramask 810S Stencil Film

Oramask 810S is designed for use in conformable stencil applications, especially for paint and spray techniques on complex curves, uneven or semi-flexible substrates and surfaces requiring transparency of the mask for substrate visibility.

This product also works great with solvent-based paint. It is suitable for wet applications.

This film is not reusable.

ApplicationsDeveloped for use in conformable stencil applications, especially for paint and spray techniques on complex curves, uneven or semi-flexible substrates and surfaces requiring transparency of the mask for substrate visibility. Suitable for wet applications.
Thickness3 mil
DurabilityNot reusable
Release Liner84# silicone coated paper
AdhesiveClear, solvent-based, low-tack, removable adhesive
Film
ColorsAvailable in transparent dark grey with a matte surface

Full specs: ORAMASK® 810s STENCIL FILM

Oramask 811 Stencil Film

Oramask 811 is designed for use in stencil applications, especially for paint and spray techniques on smooth, flat, rigid substrates and surfaces. Not suitable for wet applications.

This film is not reusable.

ApplicationsDeveloped for use in stencil applications, especially for paint and spray techniques on smooth, flat, rigid substrates and surfaces. Not suitable for wet applications.
Thickness3 mil
DurabilityNot reusable
Release Liner84# blue silicone coated paper
AdhesiveClear, water-based, low-tack, removable adhesive
Film
ColorsAvailable in white with a matte surface

Full specs: ORAMASK® 811 STENCIL FILM

Oramask 813 Stencil Film

Oramask 813 is designed for use in stencil applications, especially for paint and spray techniques on smooth, flat, rigid substrates and surfaces. Applications requiring transparency of the mask for substrate visibility. Not suitable for wet applications.

This film is not reusable.

ApplicationsDeveloped for use in stencil applications, especially for paint and spray techniques on smooth, flat, rigid substrates and surfaces. Not suitable for wet applications.
Thickness3 mil
DurabilityNot reusable
Release Liner84# silicone coated paper
AdhesiveClear, water-based, low-tack, removable adhesive
Film
ColorsAvailable in translucent blue with a matte surface

Full specs: ORAMASK® 813 STENCIL FILM

Oracal 951 Premium Cast

Oracal 951 is a premium, high-quality cast vinyl that's designed to last up to 10 years under extreme weather conditions. Available in 151 vivid colors to make it stand out, making it also great for vehicle graphics and interior signage.

This vinyl is designed to be of the highest quality for commercial or industrial purposes.

Suitable for use on plotter cutting systems.

ApplicationsLong-term lettering and high-quality vehicle and fleet graphics
Thickness2 mil
DurabilityUp to 10 years
Release Liner84# custom silicone coated paper with special release characteristics that provide excellent weeding and release values. Customized blue silicone paper liner for matte and gloss white provides superior contrast for weeding.
AdhesiveClear, solvent-based, permanent adhesive
FilmCast
ColorsAvailable in 151 high gloss colors, plus transparent, matte white and matte black

Full specs: ORACAL® 951 PREMIUM CAST FILM

Oralite 5061 Transparent Film

Oralite 5061 is a transparent film used as a protective layer on white or printed reflective films that are intended for long-term outdoor use.

It's very durable, lasting up to 12 years. It works well on outdoor signs for traffic control and warnings. It comes in clear, and 7 other colors.

Suitable for use on plotter cutting systems.

ApplicationsLong-term outdoor applications such as letterings, markings, and symbols on traffic control, guidance, warning, and information signs.
Thickness3 mil
DurabilityUp to 12 years
Release Liner4-mil, polyester film, silicone coated on one side, reverse treated
AdhesiveSolvent polyacrylate, permanent, transparent
Film
Colorsclear, yellow, orange, red, green, blue, and brown transparent, opaque black

Full specs: ORALITE® 5061 TRANSPARENT OVERLAY FILM

Oralite 5071 Lettering Film

Oralite 5071 is designed to layer on top of reflective films for long-term applications, such as lettering or markings on traffic and informational signs.

This film is very durable, lasting 12 years and comes in transparent and 7 other colors.

Suitable for use on plotter cutting systems.

ApplicationsOptimized for layering on reflective films to produce long-term outdoor applications such as lettering, markings, and symbols on traffic control, guidance, warning and information signs.
Thickness3 mil
DurabilityUp to 12 years
Release Liner4-mil, polyester film, silicone coated on one side, reverse treated
AdhesiveSolvent polyacrylate, permanent, transparent
Film
Colorsclear, yellow, orange, red, green, blue, and brown transparent, opaque black

Full specs: ORALITE® 5061 TRANSPARENT OVERLAY FILM

Oralite 5081 Lettering Film

Oralite 5081 is a lettering film designed to layer on top of other reflective films that are designed for long-term applications, such as traffic and warning signs.

This film lasts 10 years and provides maximum light protection and weathering resistance. Available in black, gloss or matte.

Suitable for use on plotter cutting systems.

ApplicationsOptimized for layering on reflective films to produce long-term outdoor applications such as lettering, markings and symbols on traffic control, guidance, warning and information signs.
Thickness2 mil
Durability10 years
Release Liner84# silicone coated paper
AdhesiveClear, solvent-based, permanent adhesive
Film
ColorsBlack; gloss and matte (with watermark)

Full specs: ORALITE® 5081 LETTERING FILM

Oralite 5300 Commercial Grade

Oralite 5300 is an economic film for short to medium term use in outdoor, economical, reflective traffic, guidance, warning and information signs as well as reflective lettering, numbers and symbols that are not required to comply with national specifications for retroreflectivity.

This vinyl lasts up to 7 years and is available in 6 colors.

Suitable for use on plotter cutting systems.

ApplicationsEconomical traffic, guidance, warning and information signs as well as reflective lettering, numbers and symbols.
Thickness3 mil
Durability7 years
Release Liner89# PE-coated silicone paper
AdhesiveClear, solvent-based, permanent adhesive
Film
Colors6 colors - white, yellow, orange, red, green, blue

Full specs: ORALITE® 5300 COMMERCIAL GRADE

Oralite 5500 Engineer Grade

Oralite 5500 is perfect for long-term, outdoor, reflective traffic control, and lettering applications. It is corrosion and solvent resistant and lasts 7 years. Available in 8 colors.

Suitable for use on plotter cutting systems.

ApplicationsTraffic control, guidance, warning, and information signs as well as reflective lettering, numbers and symbols.
Thickness4.25 mil
Durability7 years
Release Liner89# PE-coated silicone paper
AdhesiveClear, solvent-based, permanent adhesive
Film
Colors8 colors - white, yellow, orange, red, green, blue. brown, black

Full specs: ORALITE® 5500 ENGINEER GRADE

Oralite 5600 Fleet Engineer Grade

Oralite 5600 is a reflective vinyl that was specifically designed for emergency vehicles, police cars, and construction equipment. It is a tough weather and corrosion resistant vinyl that is highly flexible, being able to be applied to moderately curved surfaces.

It lasts 7 years and available in 11 colors. Although Oralite is considered permanent, it is removable with heat when needed.

Suitable for use on plotter cutting systems.

ApplicationsSpecially developed for vehicle graphics applications to produce reflective lettering, markings, and decorations.
Thickness5 mil (average)
Durability7 years (unprinted)
Release Liner89# PE-coated silicone paper
AdhesiveClear, solvent-based, permanent adhesive (removable with heat)
FilmCast
ColorsAvailable in 11 colors

Full specs: ORALITE® 5600 FLEET ENGINEER GRADE REFLECTIVE FILM

Oralite 5600RA Fleet Engineer Grade

Oralite 5600RA is very similar to Oralite 5600. The difference between Oralite 5600 and Oralite 5600RA is that Oralite 5600RA is easier to apply and reduces bubbles during application.

Suitable for use on plotter cutting systems.

ApplicationsDesigned to make fleet applications easier by reducing the incidence of bubbles.
Thickness5 mil (average)
Durability7 years (unprinted)
Release Liner89# PE-coated silicone paper featuring advanced air release technology to facilitate quicker, easier application
AdhesiveClear, solvent-based, repositionable, permanent low initial tack adhesive (removable with heat)
FilmCast
ColorsAvailable in 11 colors

Full specs: ORALITE® 5650RA FLEET ENGINEERING GRADE REFLECTIVE FILM WITH RAPIDAIR® TECHNOLOGY

Oralite 5700 Engineer Grade Premium

Oralite 5700 was developed for the manufacture of long-term, outdoor, traffic control, guidance, warning and information signs as well as reflective lettering, numbers and symbols.

It has excellent reflectivity in poor visibility and bad weather conditions. Manufactured with a special impact and scratch resistant surface.

It's durable, providing good resistance to chemicals and corrosion and lasts 7 years and is available in 8 colors.

Suitable for use on plotter cutting systems.

ApplicationsTraffic control, guidance, warning, and information signs as well as reflective lettering, numbers and symbols. Intended for long-term outdoor use.
Thickness6 mil
Durability7 years
Release Liner89# PE-coated silicone paper
AdhesiveClear, solvent-based, permanent adhesive
Film
Colors8 colors - white, yellow, orange, red, green, blue, brown, black

Full specs: ORALITE® 5700 ENGINEER GRADE PREMIUM

Oralite 5800 High Intensity Grade

Oralite 5800 is a 10-mil, 10-year, highly reflective, waterproof film designed for the production of long-term traffic control, guidance, warning, and informational signs.

The special cellular structure of the film allows for the identification of the film manufacturer. Meets ASTM D 4956 specifications for Type III, Class 1 retroreflective sheeting. Available in 7 colors.

Suitable for use on plotter cutting systems.

ApplicationsLong-term traffic control, guidance, warning, and informational signs
Thickness10 mil
Durability10 years
Release Liner3-mil, polypropylene film, silicone coated on one side
AdhesiveClear, solvent-based, permanent adhesive
Film
Colors7 colors - white, yellow, orange, red, green, blue, brown

Full specs: ORALITE® 5800 HIGH-INTENSITY GRADE

Oralite 5860 High Intensity Construction Grade

Oralite 5860 is a 10-mil*, 5-year, highly reflective film. Meets ASTM D 4956 specifications for Type III, Class 1 retroreflective sheeting.

Designed for the production of long-term traffic control, guidance, warning, and informational signs. Available in 6 colors.

Suitable for use on plotter cutting systems.

ApplicationsDesigned for the production of long-term traffic control, guidance, warning and informational signs.
Thickness10 mil
Durability5 years (unprinted)
Release Liner3-mil, polypropylene film, silicone coated on one side
AdhesiveClear, solvent-based, permanent adhesive
Film
Colors6 colors - white, yellow, orange, red, green, blue, brown

Full specs: ORALITE® 5860 HIGH-INTENSITY CONSTRUCTION GRADE REFLECTIVE FILM

Oracal 6510 Fluorescent Cast

Oracal 6510 vinyl is ideal where high visibility is needed, even during normal and low light conditions. It comes in 6 fluorescent colors and can be applied similarly to Oracal 651. Some applications might include bus advertising, POP displays, and retail applications. Durability is 6-12 months depending on color.

One difference between Oracal 6510 and Oracal 651 is that 6510 has a different color on the backside of the vinyl.

Suitable for use on plotter cutting systems.

ApplicationsShort-term graphics that require high-impact visibility such as vehicle and bus advertising, POP displays, labels, decals and retail applications
Thickness4 mil
Durability1 year

6 months pink and orange fluorescent

Release Liner84# silicone coated paper
AdhesiveClear, solvent-based, permanent adhesive
FilmCast
ColorsAvailable in 6 colors - yellow fluorescent, orange fluorescent red orange fluorescent, red fluorescent, pink fluorescent, green fluorescent

Full specs: ORACAL® 6510 FLUORESCENT CAST FILM

Oracal 8300 Transparent Cal

Oracal 8300 is a special film designed for indoor and outdoor decorative usage on glass and illuminated signs. Along with being transparent, it is UV-stabilized and lasts up to 5 years.

This film is perfect for applications where there is a backlit surface such as illuminated signs and even tinted glass. Available in 30 vivid transparent colors.

Suitable for use on plotter cutting systems.

ApplicationsIndoor and outdoor decorative design uses on glass, especially illuminated signs and window graphics. Suitable for both wet and dry applications.
Thickness3 mil
Durability5 years
Release Liner84# silicone coated paper
AdhesiveClear, solvent-based, permanent adhesive
FilmCalendered
ColorsAvailable in 30 gloss colors

Full specs: ORACAL® 8300 TRANSPARENT CALENDERED

 

Oracal 8510 Etched Glass Cal

Oracal 8510 is designed specifically for outdoor decorative design use on glass, such as shop windows and doors. Colors are limited to silver and gold and come in two variants - fine and coarse.

This is a permanent adhesive that gives windows an 'etched glass' look. It can also be used on mugs and cups when they are gently hand washed.

Suitable for use on plotter cutting systems.

ApplicationsIndoor and outdoor decorative design use on glass, especially shop windows and doors
Thickness3 mil
Durability7 years
Release Liner84# silicone coated paper
AdhesiveClear, solvent-based, permanent adhesive
FilmCalendered
ColorsAvailable in silver and gold, in coarse and fine textures

Full specs: ORACAL® 8510 ETCHED GLASS CAL FILM

Oracal 8710 Etched Glass Cal

Oracal 8710 is a dusted vinyl that is available only in translucent grey. It was designed for decorative glass for that etched glass appearance. It is great for shop windows, room dividers, and glass doors. Wet application is recommended.

Suitable for use on plotter cutting systems.

ApplicationsDeveloped for decorative glass or mirror design elements, to achieve a translucent etched glass appearance. Great for shop windows, room dividers, and glass doors. Wet application is recommended.
Thickness2.75 mil
Durability7 years
Release Liner84# silicone coated paper on one side, with special release characteristics that provides excellent weeding and release properties.
AdhesiveClear, solvent polyacrylate, permanent adhesive
FilmCalendered
ColorsTranslucent grey

Full specs: ORACAL® 8710 DUSTED GLASS CALENDERED FILM

Oracal 8810 Frosted Glass Cast

Oracal 8810 is a long-term vinyl developed for decorative sparkling effects on glass and glass-like shop windows and doors. It's rough surface and reduced gloss prevent unwanted reflection. Available in 5 colors and lasts 7 years.

Suitable for use on plotter cutting systems.

ApplicationsLong-term indoor and outdoor decorative design; developed for long-term decorative sparkling effects on glass and glass-like shop windows and doors
Thickness3 mil
Durability7 years
Release Liner4-mil polyester film
AdhesiveClear, solvent-based, permanent adhesive
FilmCast
ColorsAvailable in 5 colors - soft pink, ice blue, mint, silver grey, gold

Full specs: ORACAL® 8810 FROSTED GLASS CAST FILM

Oralux 9300 Luminescent Cast

Oralux 9300 is a glow in the dark film that lasts 5 years. It's ideal for indoor safety and emergency exit signage in buildings, cruise ships, and airplanes.

ApplicationsIndoor safety and emergency exit signage in buildings, cruise ships, and airplanes
Thickness6 mil
Durability5 years
Release Liner90# PE-coated silicone paper
AdhesiveSolvent-polyacrylate, permanent adhesive
FilmCast
ColorsAvailable in an off-white, gloss surface (glow in the dark)

Full specs: ORALUX® 9300 LUMINESCENT CAST FILM

New to Die Cutting? Get the Ultimate Beginner's Guide